Re: Project: "Sweet 16" Update; ignition Help

This is a good starting place. Let me know what happens.

Mike R. Cole
----- Original Message -----
From: Michael Frenn <semsc@...>
To: <omc-boats@...>
Sent: Monday, June 25, 2001 5:49 PM
Subject: Re: Project: "Sweet 16" Update; ignition Help

> Mike,
>
> Thanks for the help! I checked on parts today, the points and condesor
> sell for about $40, and I think I'll get those just casue the motor has
been
> sitting idle for 2 years. The coil was $60, so I think I'll wait on that.
> I thought I would disconnect any wires to the magneto that might be
> grounding it out and see if that makes a difference. If you have any
other
> thoughts, I'd sure appreciate them.
>
> TIA
>
> Michael Frenn
> ----- Original Message -----
> From: "Mike Cole" <mikec@...>
> To: <omc-boats@...>
> Sent: Monday, June 25, 2001 1:46 PM
> Subject: Re: Project: "Sweet 16" Update; ignition Help
>
>
> > The first place to check would be the rotor, cap, and points. Make sure
> the
> > points are opening and closing.
> >
>
>
Received on Tuesday, 26 June 2001