Re: [omc-boats] RE: omc-boats-digest V1 #176 from lib1 on 2004-07-20 (OMC-Boats Mailing List Archive)

From: lib1 <lib1@...>
Date: Tue, 20 Jul 2004 16:04:56 -0600

Very common problem. To test the unit for proper electrical characteristics;
put you multimeter on ohms scale. Place your meter test leads across the two
sending unit terminals, which you have disconnected by now from the boat,
right? As you move the float arm back and forth the meter should vary from ~
33 to ~ 240 ohms.

But you need a new sender anyway because once the float leaks, it's time for a
new sending unit.

Lee

----- Original Message -----
From: "Gregory B. Fell" <gfell@...>
To: <omc-boats@...>
Sent: Tuesday, July 20, 2004 3:43 PM
Subject: [omc-boats] RE: omc-boats-digest V1 #176

> I believe I have found the problem. The floater has gas in it. I don't
> know why I didn't notice it when I pulled it. The sender is probably still
> working; but, the floater is not floating so it's always going to read
> empty.
>
> Gregory B. Fell
> The Fell Law Firm
> 3300 Oak Lawn Avenue, Suite 700
> Dallas, Texas 75219
> 972-488-8177
> 214-219-4218 - fax
> gfell@...
>
> -----Original Message-----
> From: owner-omc-boats@... [mailto:owner-omc-boats@...]On
> Behalf Of lib1@...
> Sent: Friday, July 16, 2004 11:58 PM
> To: omc-boats@...
> Subject: Re: omc-boats-digest V1 #176
>
> Recently, I located a new Stewart-Warner fuel sender for $22.00, (with
> adjustable arm to compensate for tank depth) at one of the local semi truck
> parts distributors that was listed on the S-W website. The original was was
> rusted out and no longer changing resistance. The five-bolt pattern for
> mounting the sender is pretty common. Had the tank out anyways for a
> cleaning and coating.
>
> Lee Shuster
> Salt Lake
>
> PS -- The original pre-67 guages are in unique (square) housings. Maybe
> Aqua-Meter, Airguide or S-W supplied them to OMC, but they were unique to
> OMC. Presently, my Sportsman tach on my V6 Buick is currently reading
> exactly double what it should, which would be the same pulse count as a
> 2-stroke (12-pole) alternator output. This winter I'll tear it down and see
> what's behind the meter faceplate.
>
>
>
>
> ----- Original Message -----
> From: "Thomas Klauber" <tklauber@...>
> To: <omc-boats-digest@...>
> Sent: Friday, July 16, 2004 9:27 PM
> Subject: Re: omc-boats-digest V1 #176
>
>
> > Lee, The gauges are fairly common ( esp. tachs) on e-bay in various stages
> > from NOS to well used. They made plenty of them for all different models
> of
> > boats I would guess. I still don't know who made them but I would guess
> > Stewart Warner. I always thought the gauges on my Rogue kinda looked like
> > the ones on vintage Mustangs and other Fords. To Greg Fell, I would check
> > the wiring at the tank first and then under the dash. I had a
> nonfunctioning
> > gauge that worked after fixing the ground at the sending unit. It was
> making
> > poor contact. It had been broken for years and when I fixed it I noticed
> the
> > gauge would only go to about 1/4 a tank. I pulled the tank this winter to
> > clean and paint it and found the float was binding in the pickup tube - a
> > simple fix. I was lucky cause I just knew I would have to replace the
> > sending unit which would have been a real PIA trying to find etc. I think
> > the sending unit is made by Stewart Warner. Good luck! TK
> > ----- Original Message -----
> > From: "omc-boats-digest" <owner-omc-boats-digest@...>
> > To: <omc-boats-digest@...>
> > Sent: Thursday, July 15, 2004 12:00 PM
> > Subject: omc-boats-digest V1 #176
> >
> >
> > >
> > > omc-boats-digest Thursday, July 15 2004 Volume 01 : Number
> > 176
> > >
> > >
> > >
> > > Re: Question
> > > RE: Question
> > > fuel guage
> > >
> > > ----------------------------------------------------------------------
> > >
> > > Date: Wed, 14 Jul 2004 15:26:11 -0600
> > > From: "lib1" <lib1@...>
> > > Subject: Re: Question
> > >
> > > This is a multi-part message in MIME format.
> > >
> > > - ------=_NextPart_000_0046_01C469B6.E47E18D0
> > > Content-Type: text/plain;
> > > charset="Windows-1252"
> > > Content-Transfer-Encoding: quoted-printable
> > >
> > > Excellent topic for more discussion. OMC tended to use top-grade stuff,
> =
> > > but you are right finding the right part to retain the originality is =
> > > tough. For example, anyone know who OEM'ed our boats instruments?
> > >
> > > Lee
> > > Salt Lake
> > > ----- Original Message -----=20
> > > From: Thomas Klauber=20
> > > To: omc-boats@...=20
> > > Sent: Tuesday, July 13, 2004 8:35 PM
> > > Subject: Question
> > >
> > >
> > > Anybody out there got any idea on finding out who made component parts
> =
> > > for the Evinrude boats? Like who made the aluminum rub rails for these =
> > > boats and sold them to Evinrude? Who made the plastic light lenses? =
> > > Where did this stuff come from and how do we go about recreating them to
> =
> > > keep our boats looking good. The remaining spare parts are few and hard
> =
> > > to find. Any price would be reasonable considering the price of a new =
> > > boat with its attendant expenses. I've been thinking about this for some
> =
> > > time and thought I would throw it out for discussion. Also I have =
> > > learned that the best sealer for the transom seal is 3M 101 Marine =
> > > Sealant. It is nasty stuff , messy but it works better than anything =
> > > else. I tried several types of silicone sealant and they don't seem to =
> > > work as well. Hope everyone is enjoying the water this summer. Be =
> > > thinking about that winter project. I think I''ll tear down and re-do =
> > > the sterndrive. Still got some minor trim in the cockpit to do and still
> =
> > > need to get the wiring shipshape! Tom K.
> > > - ------=_NextPart_000_0046_01C469B6.E47E18D0
> > > Content-Type: text/html;
> > > charset="Windows-1252"
> > > Content-Transfer-Encoding: quoted-printable
> > >
> > > <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> > > <HTML><HEAD>
> > > <META http-equiv=3DContent-Type content=3D"text/html; =
> > > charset=3Dwindows-1252">
> > > <META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
> > > <STYLE></STYLE>
> > > </HEAD>
> > > <BODY bgColor=3D#ffffff>
> > > <DIV>Excellent topic for more discussion. =
> > > OMC tended to=20
> > > use top-grade stuff, but you are right finding the right part to retain
> =
> > > the=20
> > > originality is tough. For example, anyone know who OEM'ed our boats
> =
> > >
> > > instruments?</DIV>
> > > <DIV> </DIV>
> > > <DIV>Lee</DIV>
> > > <DIV>Salt Lake</DIV>
> > > <BLOCKQUOTE dir=3Dltr=20
> > > style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
> > > BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
> > > <DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
> > > <DIV=20
> > > style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
> > > black">From:=20
> > > <A title=3Dtklauber@... =
> > > href=3D"mailto:tklauber@...">Thomas=20
> > > Klauber</A> </DIV>
> > > <DIV style=3D"FONT: 10pt arial">To: <A =
> > > title=3Domc-boats@...=20
> > > href=3D"mailto:omc-boats@...">omc-boats@...</A> =
> > > </DIV>
> > > <DIV style=3D"FONT: 10pt arial">Sent: Tuesday, July 13, 2004 =
> > > 8:35=20
> > > PM</DIV>
> > > <DIV style=3D"FONT: 10pt arial">Subject: Question</DIV>
> > > <DIV> </DIV>
> > > <DIV>Anybody out there got any idea on =
> > > finding out who=20
> > > made component parts for the Evinrude boats? Like who made the =
> > > aluminum rub=20
> > > rails for these boats and sold them to Evinrude? Who made the plastic
> =
> > > light=20
> > > lenses? Where did this stuff come from and how do we go about =
> > > recreating them=20
> > > to keep our boats looking good. The remaining spare parts are few and
> =
> > > hard to=20
> > > find. Any price would be reasonable considering the price of a new =
> > > boat with=20
> > > its attendant expenses. I've been thinking about this for some =
> > > time and=20
> > > thought I would throw it out for discussion. Also I have learned that
> =
> > > the best=20
> > > sealer for the transom seal is 3M 101 Marine Sealant. It is nasty =
> > > stuff ,=20
> > > messy but it works better than anything else. I tried several types of
> =
> > >
> > > silicone sealant and they don't seem to work as well. Hope everyone is
> =
> > >
> > > enjoying the water this summer. Be thinking about that winter project.
> =
> > > I think=20
> > > I''ll tear down and re-do the sterndrive. Still got some minor trim in
> =
> > > the=20
> > > cockpit to do and still need to get the wiring =
> > > shipshape!   =20
> > > Tom K.</DIV></BLOCKQUOTE></BODY></HTML>
> > >
> > > - ------=_NextPart_000_0046_01C469B6.E47E18D0--
> > >
> > > ------------------------------
> > >
> > > Date: Thu, 15 Jul 2004 08:24:02 -0500
> > > From: "Gregory B. Fell" <gfell@...>
> > > Subject: RE: Question
> > >
> > > This is a multi-part message in MIME format.
> > >
> > > - ------=_NextPart_000_0016_01C46A45.1693F720
> > > Content-Type: text/plain;
> > > charset="Windows-1252"
> > > Content-Transfer-Encoding: 8bit
> > >
> > > Speaking of instruments - I just went for my first ride of the summer
> and
> > > found the my fuel gauge is not working. Any suggestions on where to
> start
> > > with the diagnosis.
> > >
> > > Gregory B. Fell
> > > The Fell Law Firm
> > > 3300 Oak Lawn Avenue, Suite 700
> > > Dallas, Texas 75219
> > > 972-488-8177
> > > 214-219-4218 - fax
> > > gfell@...
> > >
> > > - -----Original Message-----
> > > From: owner-omc-boats@...
> [mailto:owner-omc-boats@...]On
> > > Behalf Of lib1
> > > Sent: Wednesday, July 14, 2004 4:26 PM
> > > To: omc-boats@...
> > > Subject: Re: Question
> > >
> > > Excellent topic for more discussion. OMC tended to use top-grade stuff,
> > but
> > > you are right finding the right part to retain the originality is tough.
> > For
> > > example, anyone know who OEM'ed our boats instruments?
> > >
> > > Lee
> > > Salt Lake
> > > - ----- Original Message -----
> > > From: Thomas Klauber <mailto:tklauber@...>
> > > To: omc-boats@... <mailto:omc-boats@...>
> > > Sent: Tuesday, July 13, 2004 8:35 PM
> > > Subject: Question
> > >
> > > Anybody out there got any idea on finding out who made component parts
> for
> > > the Evinrude boats? Like who made the aluminum rub rails for these boats
> > and
> > > sold them to Evinrude? Who made the plastic light lenses? Where did this
> > > stuff come from and how do we go about recreating them to keep our boats
> > > looking good. The remaining spare parts are few and hard to find. Any
> > price
> > > would be reasonable considering the price of a new boat with its
> attendant
> > > expenses. I've been thinking about this for some time and thought I
> would
> > > throw it out for discussion. Also I have learned that the best sealer
> for
> > > the transom seal is 3M 101 Marine Sealant. It is nasty stuff , messy but
> > it
> > > works better than anything else. I tried several types of silicone
> sealant
> > > and they don't seem to work as well. Hope everyone is enjoying the water
> > > this summer. Be thinking about that winter project. I think I''ll tear
> > down
> > > and re-do the sterndrive. Still got some minor trim in the cockpit to do
> > and
> > > still need to get the wiring shipshape! Tom K.
> > >
> > > - ------=_NextPart_000_0016_01C46A45.1693F720
> > > Content-Type: text/html;
> > > charset="Windows-1252"
> > > Content-Transfer-Encoding: quoted-printable
> > >
> > > <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> > > <html xmlns:v=3D"urn:schemas-microsoft-com:vml" =
> > > xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
> > > xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
> > > xmlns=3D"http://www.w3.org/TR/REC-html40">
> > >
> > > <head>
> > > <META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
> > > charset=3DWindows-1252">
> > >
> > >
> > > <meta name=3DProgId content=3DWord.Document>
> > > <meta name=3DGenerator content=3D"Microsoft Word 9">
> > > <meta name=3DOriginator content=3D"Microsoft Word 9">
> > > <link rel=3DFile-List href=3D"cid:filelist.xml@...">
> > > 
> > > <style>
> > > 
> > > </style>
> > > 
> > > </head>
> > >
> > > <body bgcolor=3Dwhite lang=3DEN-US link=3Dblue vlink=3Dblue =
> > > style=3D'tab-interval:.5in'>
> > >
> > > <div class=3DSection1>
> > >
> > > > > style=3D'mso-bidi-font-weight:
> > > normal'> > > style=3D'font-size:
> > > 12.0pt'>Speaking of instruments =96 I just went for my first ride of the
> =
> > > summer
> > > and found the my fuel gauge is not working. =
> > > yes">=A0
> > > Any suggestions on where to start with the =
> > > diagnosis.<o:p></o:p>
> > >
> > > > > style=3D'mso-bidi-font-weight:
> > > normal'> > > style=3D'font-size:
> > > 12.0pt'><![if =
> > >
> !supportEmptyParas]> <![endif]><o:p></o:p><=
> > > /p>
> > >
> > >  > > class=3DEmailStyle17><b
> > > style=3D'mso-bidi-font-weight:normal'><![if =
> > > !supportEmptyParas]> <![endif]><o:p></o:p>
> > >
> > > > > color=3Dblack
> > > face=3DTahoma> > > style=3D'font-size:10.0pt;font-family:Tahoma;color:black'>-----Original
> > > Message----- 
> > > From: =
> > > owner-omc-boats@...
> > > [mailto:owner-omc-boats@...] > > style=3D'font-weight:bold'>On
> > > Behalf Of lib1 
> > > Sent: Wednesday, July 14,
> =
> > > 2004
> > > 4:26 PM 
> > > To: =
> > > omc-boats@... 
> > > Subject: Re: =
> > > Question
> > >
> > > > > face=3D"Times New Roman"><span
> > > style=3D'font-size:12.0pt'><![if =
> > > !supportEmptyParas]> <![endif]><o:p></o:p>
> > >
> > > > > color=3Dblack
> > > face=3DArial> > > style=3D'font-size:10.0pt;font-family:Arial;color:black'>Excellent
> > > topic for more discussion. OMC tended to use top-grade stuff, but you =
> > > are right
> > > finding the right part to retain the originality is tough. For example,
> =
> > > anyone
> > > know who OEM'ed our boats instruments? > > color=3Dblack><span
> > >
> style=3D'color:black;mso-color-alt:windowtext'><o:p></o:p><=
> > > /p>
> > >
> > > > > color=3Dblack
> > > face=3D"Times New Roman"> > > style=3D'font-size:12.0pt;color:black'> <font
> > > color=3Dblack> > >
> style=3D'color:black;mso-color-alt:windowtext'><o:p></o:p><=
> > > /p>
> > >
> > > > > color=3Dblack
> > > face=3DArial> > >
> style=3D'font-size:10.0pt;font-family:Arial;color:black'>Lee</font=
> > > ><font
> > > color=3Dblack> > >
> style=3D'color:black;mso-color-alt:windowtext'><o:p></o:p><=
> > > /p>
> > >
> > > > > color=3Dblack
> > > face=3DArial> > > style=3D'font-size:10.0pt;font-family:Arial;color:black'>Salt
> > > Lake > > style=3D'color:black;mso-color-alt:
> > > windowtext'><o:p></o:p>
> > >
> > > <div style=3D'border:none;border-left:solid black 1.5pt;padding:0in 0in
> =
> > > 0in 4.0pt'>
> > >
> > > > > style=3D'mso-margin-top-alt:auto;mso-margin-bottom-alt:auto;
> > > margin-left:39.75pt;border:none;mso-border-left-alt:solid black 1.5pt;
> > > padding:0in;mso-padding-alt:0in 0in 0in 4.0pt'> > > color=3Dblack
> > > face=3DArial> > > style=3D'font-size:10.0pt;font-family:Arial;color:black'>-----
> > > Original Message ----- > > face=3DArial><span
> > >
> style=3D'font-size:10.0pt;font-family:Arial;color:black;mso-color-alt:win=
> > > dowtext'><o:p></o:p>
> > >
> > > > > style=3D'mso-margin-top-alt:auto;mso-margin-bottom-alt:auto;
> > >
> margin-left:39.75pt;background:#E4E4E4;border:none;mso-border-left-alt:so=
> > > lid black 1.5pt;
> > > padding:0in;mso-padding-alt:0in 0in 0in 4.0pt'> > > color=3Dblack
> > > face=3DArial> > > style=3D'font-size:10.0pt;font-family:Arial;color:black;
> > > font-weight:bold'>
> > >
> > > <div style=3D'font-color:black'>From: > > color=3Dblack
> > > face=3DArial> > > style=3D'font-size:10.0pt;font-family:Arial;color:black'> <a
> > > href=3D"mailto:tklauber@..." =
> > > title=3D"tklauber@...">Thomas
> > > Klauber</a> </div>
> > >
> > > > > style=3D'font-size:10.0pt;font-family:
> > >
> Arial;color:black;mso-color-alt:windowtext'><o:p></o:p>=
> > >
> > >
> > > > > style=3D'mso-margin-top-alt:auto;mso-margin-bottom-alt:auto;
> > > margin-left:39.75pt;border:none;mso-border-left-alt:solid black 1.5pt;
> > > padding:0in;mso-padding-alt:0in 0in 0in 4.0pt'> > > color=3Dblack
> > > face=3DArial> > > style=3D'font-size:10.0pt;font-family:Arial;color:black;
> > > font-weight:bold'>To: > > face=3DArial><span
> > > style=3D'font-size:10.0pt;font-family:Arial;color:black'> <a
> > > href=3D"mailto:omc-boats@..." =
> > > title=3D"omc-boats@...">omc-boats@...</a>
> > > > > style=3D'font-size:10.0pt;
> > >
> font-family:Arial;color:black;mso-color-alt:windowtext'><o:p></o:p></span=
> > > >
> > >
> > > > > style=3D'mso-margin-top-alt:auto;mso-margin-bottom-alt:auto;
> > > margin-left:39.75pt;border:none;mso-border-left-alt:solid black 1.5pt;
> > > padding:0in;mso-padding-alt:0in 0in 0in 4.0pt'> > > color=3Dblack
> > > face=3DArial> > > style=3D'font-size:10.0pt;font-family:Arial;color:black;
> > > font-weight:bold'>Sent: > > face=3DArial><span
> > > style=3D'font-size:10.0pt;font-family:Arial;color:black'> Tuesday, July
> =
> > > 13, 2004
> > > 8:35 PM<span
> > >
> style=3D'font-size:10.0pt;font-family:Arial;color:black;mso-color-alt:win=
> > > dowtext'><o:p></o:p>
> > >
> > > > > style=3D'mso-margin-top-alt:auto;mso-margin-bottom-alt:auto;
> > > margin-left:39.75pt;border:none;mso-border-left-alt:solid black 1.5pt;
> > > padding:0in;mso-padding-alt:0in 0in 0in 4.0pt'> > > color=3Dblack
> > > face=3DArial> > > style=3D'font-size:10.0pt;font-family:Arial;color:black;
> > > font-weight:bold'>Subject: > > face=3DArial> > > style=3D'font-size:10.0pt;font-family:Arial;color:black'>
> > > Question<span
> > >
> style=3D'font-size:10.0pt;font-family:Arial;color:black;mso-color-alt:win=
> > > dowtext'><o:p></o:p>
> > >
> > > > > style=3D'mso-margin-top-alt:auto;mso-margin-bottom-alt:auto;
> > > margin-left:39.75pt;border:none;mso-border-left-alt:solid black 1.5pt;
> > > padding:0in;mso-padding-alt:0in 0in 0in 4.0pt'> > > color=3Dblack
> > > face=3D"Times New Roman"> > > style=3D'font-size:12.0pt;color:black'><![if =
> > > !supportEmptyParas]> <![endif]><font
> > > color=3Dblack> > >
> style=3D'color:black;mso-color-alt:windowtext'><o:p></o:p><=
> > > /p>
> > >
> > > > > style=3D'mso-margin-top-alt:auto;mso-margin-bottom-alt:auto;
> > > margin-left:39.75pt;border:none;mso-border-left-alt:solid black 1.5pt;
> > > padding:0in;mso-padding-alt:0in 0in 0in 4.0pt'> > > color=3Dblack
> > > face=3DArial> > > style=3D'font-size:10.0pt;font-family:Arial;color:black'>Anybody
> > > out there got any idea on finding out who made component parts for the =
> > > Evinrude
> > > boats? Like who made the aluminum rub rails for these boats and sold =
> > > them to
> > > Evinrude? Who made the plastic light lenses? Where did this stuff come =
> > > from and
> > > how do we go about recreating them to keep our boats looking good. The
> > > remaining spare parts are few and hard to find. Any price would be =
> > > reasonable
> > > considering the price of a new boat with its attendant expenses. I've =
> > > been
> > > thinking about this for some time and thought I would throw it out
> =
> > > for
> > > discussion. Also I have learned that the best sealer for the transom =
> > > seal is 3M
> > > 101 Marine Sealant. It is nasty stuff , messy but it works better than =
> > > anything
> > > else. I tried several types of silicone sealant and they don't seem to =
> > > work as
> > > well. Hope everyone is enjoying the water this summer. Be thinking about
> =
> > > that
> > > winter project. I think I''ll tear down and re-do the sterndrive. Still
> =
> > > got
> > > some minor trim in the cockpit to do and still need to get the wiring
> > > shipshape!    Tom K. > > color=3Dblack><span
> > >
> style=3D'color:black;mso-color-alt:windowtext'><o:p></o:p><=
> > > /p>
> > >
> > > </div>
> > >
> > > </div>
> > >
> > > </body>
> > >
> > > </html>
> > >
> > > - ------=_NextPart_000_0016_01C46A45.1693F720--
> > >
> > > ------------------------------
> > >
> > > Date: Thu, 15 Jul 2004 10:55:33 EDT
> > > From: Pated66@...
> > > Subject: fuel guage
> > >
> > > - --part1_9e.f4b1e07.2e27f4e5_boundary
> > > Content-Type: text/plain; charset="US-ASCII"
> > > Content-Transfer-Encoding: 7bit
> > >
> > > Greg,
> > > I'd start with a general check of the wiring under the dash, especially
> > the
> > > grounds.
> > > If you ran the tank down, you can (easier with a helper) disconnect the
> > leads
> > > going form the tank to the guage and put a meter across them. Check the
> > > resistance as your helper fills the tank. This will tell you if the
> > problem is
> > > with the sending unit in the tank, or within the guage itself.
> > >
> > > Which boat do you have?
> > > Paul Tedder
> > > Nashua NH
> > > currently boatless :-(
> > >
> > > - --part1_9e.f4b1e07.2e27f4e5_boundary
> > > Content-Type: text/html; charset="US-ASCII"
> > > Content-Transfer-Encoding: quoted-printable
> > >
> > > <HTML><HTML> > FAMILY=
> > > =3D"SANSSERIF" FACE=3D"Arial" LANG=3D"0">Greg, 
> > > I'd start with a general check of the wiring under the dash, especially
> > the=20=
> > > grounds. 
> > > If you ran the tank down, you can (easier with a helper) disconnect the
> > lead=
> > > s going form the tank to the guage and put a meter across them. 
> > Check=20=
> > > the resistance as your helper fills the tank.  This will tell you
> if
> > th=
> > > e problem is with the sending unit in the tank, or within the guage
> > itself.<=
> > > BR>
> > > 
> > > Which boat do you have? 
> > > Paul Tedder 
> > > Nashua NH 
> > > currently boatless :-(</HTML>
> > >
> > > - --part1_9e.f4b1e07.2e27f4e5_boundary--
> > >
> > > ------------------------------
> > >
> > > End of omc-boats-digest V1 #176
> > > *******************************
> > >
> > >
> >
> >
> >
>
>
>
Received on Tuesday, 20 July 2004