Re: [omc-boats] 1966 Rogue spotted on ebay, Flanagan, IL

The wheel bolt pattern for all OMC trailers is the standard 5-bolt on 4.5-inch dia. The rub is the typical wheel's center hub hole. The OMC wheel center hole is larger than normal to accommodate the heavy-duty hub assembly used whether or not the trailer was equipped with disc brakes.

I haven't tried this, but some have mentioned refitting the OMC axles with more modern bearing.hub assemblies and then using readily available 13 or 14-inch wheels with 5 on 4.5-in bolt patterns.

Lee
  ----- Original Message -----
  From: Glenn Halweg
  To: omc-boats@...
  Sent: Tuesday, March 22, 2005 11:08 PM
  Subject: Re: [omc-boats] 1966 Rogue spotted on ebay, Flanagan, IL

  I'll try this again! That's the one I was asking about tires for. One of the tires is falling apart and if I were to buy it I need to tow it 130 miles on interstate highway or spend 5 hrs traveling back roads. I have 8 & 12 inch tires but no 10's. Curious does any one know the bolt pattern for the original wheels? Owner is not sure about the bolt pattern but tires are 6.50 X 10. Wondering if my 12" 4 bolt might fit.

  ----- Original Message -----
    From: lib1@...
    To: omc-boats@...
    Sent: Tuesday, March 22, 2005 11:20 PM
    Subject: [omc-boats] 1966 Rogue spotted on ebay, Flanagan, IL

    http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=63685&item=4537349490&rd=1

    Lee

-----
To get off this list send mail to omc-boats-unsubscribe@...
Received on Wednesday, 23 March 2005