Ok, so I now know how the tilt jack works, mine works, sort of. The jack goes in an out as it should, but there's no way to crank it to turn the mechanism. I removed the jack from the trailer and attached some vise grips to the top of the jack and began to turn it. It works right, but I'm missing the crank and the gear that would be on the end of the shaft to meet up with the crank gear. Anybody have any ideas?
~Scott
-----
To get off this list send mail to omc-boats-unsubscribe@...
Received on Monday, 25 April 2005
This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT