Re: [omc-boats] Updated 1964 - 1966 Prop Part Numbers

Hi Paul,

Everybody must be hibernating! Last week was around 0 degree's here in Northern Illinois. Not much boating going on!

Glenn
 
  ----- Original Message -----
  From: Paul Hamilton
  To: omc-boats@...
  Sent: Tuesday, February 21, 2006 9:06 PM
  Subject: RE: [omc-boats] Updated 1964 - 1966 Prop Part Numbers

  Hello,

  Is there anybody out there? I haven't received any messages since January. I guess I'll find out if there are issues with the list serve if I don't hear from anyone. Paul

------------------------------------------------------------------------------

  From: owner-omc-boats@... [mailto:owner-omc-boats@...] On Behalf Of lib1@...
  Sent: Monday, January 09, 2006 9:28 PM
  To: omc-boats@...
  Subject: [omc-boats] Updated 1964 - 1966 Prop Part Numbers

  Hi,

  I recently updated the following webpages to clarify which propeller part numbers

  must be used with 1964 to 1966 OMC stern drives of 120, 150 and 200 hp.

  These models require the use of the aluminum "tapered hub"-style prop, of 14.25-inch diameter, to clear the
  exhaust outlet. The later style "straight-hub," 14.00-inch diameter will not clear the 1964 - 1966 models.

  Hope everyone's having a good start to the new year.

  Lee Shuster

  Salt Lake City

  See:

  http://hhscott.com/evinrude/choosing_a_prop.htm

  and

  http://hhscott.com/evinrude/prop_usage.htm

  http://hhscott.com/evinrude/prop_chart_V8_210.htm

  http://hhscott.com/evinrude/prop_chart_V6_155.htm

  http://hhscott.com/evinrude/prop_chart_I4_120.htm

-----
To get off this list send mail to omc-boats-unsubscribe@...
Received on Tuesday, 21 February 2006