Thomas I have not been able to get to the location of where the boat is
stored to gets specs on tail light lens / I should be able to get over
there this week end / Thanks for your patience .
Gary
-----Original Message-----
From: owner-omc-boats@... [mailto:owner-omc-boats@...]
On Behalf Of Thomas Klauber
Sent: Tuesday, May 09, 2006 2:32 PM
To: omc-boats-digest@...
Subject: [omc-boats] Re: omc-boats-digest V1 #480
Isn't that part made by Grote? They are 4 inch round rubber case with
plastic lens inside. That is what is on my 69 Rogue trailer. They long
ago perished and I put a replacement fixture in from a truck salvage.
They are not designed to be submersible and the trailer (mine at least)
is made to unload at the waters edge. I submerged it all before reading
the manual.
Those old trailers are nice but too hard to fuss with so do yourself a
favor and go to a good boat trailer dealer and get them to fit a nice
new aluminum trailer. You need to minimize the things that can come
between you and a nice day on the water. My old trailer sits on an
unrestored Rogue. I do not use it. I probably have some of the old lens
etc. and if you need one I will
send what I can find. I'll need specs. on what you need. TK
----- Original Message -----
From: "omc-boats-digest" <owner-omc-boats-digest@...>
To: <omc-boats-digest@...>
Sent: Tuesday, May 09, 2006 12:00 PM
Subject: omc-boats-digest V1 #480
>
> omc-boats-digest Tuesday, May 9 2006 Volume 01 :
Number
> 480
>
>
>
> [omc-boats] Tail light lens
>
> ----------------------------------------------------------------------
>
> Date: Mon, 8 May 2006 12:58:25 -0400
> From: "Bishop, Gary" <Gary.Bishop@...>
> Subject: [omc-boats] Tail light lens
>
> This is a multi-part message in MIME format.
>
> - ------_=_NextPart_001_01C672C0.9F45E7E7
> Content-Type: text/plain;
> charset="US-ASCII"
> Content-Transfer-Encoding: quoted-printable
>
> Any one know where to get a tail light lens( round ) for the original
> Johnson trailer . The lens fits in to the rubber seal with no screws
.
> The one I have is cracked and leaks in water when loading and
> unloading boat .=20
>
> Thanks Gary
>
> - ------_=_NextPart_001_01C672C0.9F45E7E7
> Content-Type: text/html;
> charset="US-ASCII"
> Content-Transfer-Encoding: quoted-printable
>
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN"> <HTML> <HEAD> <META
> HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
> charset=3Dus-ascii"> <META NAME=3D"Generator" CONTENT=3D"MS Exchange
> Server version = 6.5.7226.0"> <TITLE>Tail light lens</TITLE> </HEAD>
> <BODY>
> <!-- Converted from text/rtf format -->
>
> <P><FONT SIZE=3D2 FACE=3D"Arial">Any one know where to get a tail
> light = lens( round ) for the original Johnson trailer .
> The lens = fits in to the rubber seal with no screws . The one I
> have is = cracked and leaks in water when loading and unloading
> boat . = </FONT></P>
>
> <P><FONT SIZE=3D2 FACE=3D"Arial">Thanks Gary</FONT> </P>
>
> </BODY>
> </HTML>
> - ------_=_NextPart_001_01C672C0.9F45E7E7--
> - -----
> To get off this list send mail to omc-boats-unsubscribe@...
>
> ------------------------------
>
> End of omc-boats-digest V1 #480
> *******************************
>
> -----
> To get off this list send mail to
> omc-boats-digest-unsubscribe@...
>
-----
To get off this list send mail to omc-boats-unsubscribe@...
-----
To get off this list send mail to omc-boats-unsubscribe@...
Received on Thursday, 11 May 2006
This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT