RE: [omc-boats] Really need trailer bearing seal info

Ya mine was about the same and they install bearing buddies too. It is a 64
evinrude trailer.

-----Original Message-----
From: owner-omc-boats@... [mailto:owner-omc-boats@...] On
Behalf Of Bishop, Gary
Sent: Monday, July 24, 2006 8:22 AM
To: omc-boats@...
Subject: RE: [omc-boats] Really need trailer bearing seal info

I just had the bearings replaced on a 1968 Johnson original trailer at a
trailer repair shop / Total cost for bearings and labor $117.00 . They
did not have any problems getting replacement parts .

Gary
Atlanta , GA

-----Original Message-----
From: owner-omc-boats@... [mailto:owner-omc-boats@...]
On Behalf Of Micah Donahue
Sent: Saturday, July 22, 2006 5:46 PM
To: omc-boats@...
Subject: [omc-boats] Really need trailer bearing seal info

Hello, all --
I really need to replace the grease seals on my 1968 Evinrude
Sportsman's original trailer. I've ordered a parts catalog from a
vintage literature place, but I'm worried I may not be able to match up
the old part #s.

Has anyone done this job? If so, I would REALLY appreciate the
manufacturer/part # info for the bearings and seals. I'd even be happy
to pay someone $50 to pull one of their seals out and write down the #s
for me. Use the $ to buy a new set of bearings for yourself as well!

Best,
-Micah Donahue
Boston, MA

-----
To get off this list send mail to omc-boats-unsubscribe@...

-----
To get off this list send mail to omc-boats-unsubscribe@...

-----
To get off this list send mail to omc-boats-unsubscribe@...
Received on Monday, 24 July 2006