Re: [omc-boats] RE: omc-boats-digest V1 #586

Hi Lee...

Thanks for this however one of the other site members (Greg) did send me a
scan for a '64 on Wednesday night. I went ahead and using it as a guide I
pieced together what I had on hand and incredibly it works ! I wish I had
gone this route earlier in the summer and saved myself the expense of using
NOS parts for the '66 system - they lasted less than 10 running hours. I
use this boat/engine for my cottage maintenance business and rack up a lot
of running time in a hurry (about 500 hours between May and November).
Thanks again for your response and willingness to help. This is a great
site for those of us who appreciate the old OMCs. I've been a longtime
convert to these engines - my dad was a Merc dealer for 25 years so I grew
up around all this stuff.

Regards

Dan McCormack

>From: <lib1@...>
>Reply-To: omc-boats@...
>To: <omc-boats@...>
>Subject: Re: [omc-boats] RE: omc-boats-digest V1 #586
>Date: Fri, 22 Sep 2006 17:52:34 -0600
>
>Hi Dan,
>
>I might have some time this weekend to dig for a EJ V4 alternator regulator
>61-65 schematic, if you still need it?
>
>Lee
>
>----- Original Message ----- From: "Dan McCormack" <mcmack@...>
>To: <omc-boats@...>
>Sent: Tuesday, September 19, 2006 6:20 PM
>Subject: RE: [omc-boats] RE: omc-boats-digest V1 #586
>
>
>>Hi Greg...
>>
>>Thanks for taking the trouble to do that.
>>
>>Regards,
>>
>>Dan
>>
>>
>>>From: Greg Van Vliet <gvanvliet@...>
>>>Reply-To: omc-boats@...
>>>To: "'omc-boats@...'" <omc-boats@...>
>>>Subject: RE: [omc-boats] RE: omc-boats-digest V1 #586
>>>Date: Tue, 19 Sep 2006 13:13:36 -0700
>>>
>>>Dan,
>>>
>>>I have a 1964 90hp Johnson and I have the Seloc manual for it with a
>>>wiring
>>>schematic. I'll try scanning it and sending it to you directly tonight.
>>> My electrical junction box is in good condtion and has the color wiring
>>>diagram on the back of the cover intact. I'll try taking a photo of the
>>>wiring and the diagram and send those also. Right now my motor and
>>>junction box are mounted on a homemade motor stand in my garage waiting
>>>to
>>>be brought back to life.
>>>
>>>Regards,
>>>Greg
>>>
>>>-----Original Message-----
>>>From: Dan McCormack [SMTP:mcmack@...]
>>>Sent: Monday, September 18, 2006 6:51 PM
>>>To: omc-boats@...
>>>Subject: Re: [omc-boats] RE: omc-boats-digest V1 #586
>>>
>>>Thanks for the response Lee. The '68 schematic does not help me but if
>>>you
>>>happen to have a '64 schematic ie. 1964 90 hp. electric shift w/20 amp
>>>alternator this would be a big help.
>>>Specificallly I need to see how the 4 diodes located in the junction box
>>>are
>>>wired. The wiring harness that I'm working with was cut up when removed
>>>from the original box and I can't be sure at this point which way to
>>>connect
>>>the diodes back up as the little connectors which only fit one way are
>>>missing. I don't want to wire it backwards and end up blowing these
>>>diodes
>>>as well ! If you do happen to have this schematic and don't want to tie
>>>up
>>>the digest site, please forward direct to me at: mcmack@... .
>>>
>>>Thanks again
>>>Dan
>>>-----
>>>To get off this list send mail to omc-boats-unsubscribe@...
>>
>>_________________________________________________________________
>>Don't waste time standing in line-try shopping online. Visit Sympatico /
>>MSN Shopping today! http://shopping.sympatico.msn.ca
>>
>>-----
>>To get off this list send mail to omc-boats-unsubscribe@...
>>
>
>-----
>To get off this list send mail to omc-boats-unsubscribe@...

_________________________________________________________________
Buy what you want when you want it on Sympatico / MSN Shopping
http://shopping.sympatico.msn.ca/content/shp/?ctId=2,ptnrid=176,ptnrdata=081805

-----
To get off this list send mail to omc-boats-unsubscribe@...
Received on Saturday, 23 September 2006