Re: [OMC-Boats] Flotation

----- Original Message -----From: Michael Peck Date: Monday, January 14, 2008 2:39 pmSubject: [OMC-Boats] FlotationTo: OMC-boats list > > Good morning to all,> I am going to replace all of the saturated flotation in my Sport > 14. Can anyone tell me how much of the pour in flotation will be > needed so I can order enough the first time?> > Thanks,> Mike> _________________________________________________________________> Share life as it happens with the new Windows Live.> http://www.windowslive.com/share.html?ocid=TXT_TAGHM_Wave2_sharelife_012008Hello Mike, Fred here. I've done the foam work this past Sept.07. I used 1-5gal of partA, and 1-5gal. of part B. I have about 1.5 of each left over but still cheaper than smaller pails. Purchased on line via Cal. to NY cheaper than buying here.I dont have my bill handy for the name of the supplier. Mike give me a call to discuss installation before removing the old floor. Retain the perimiter 1.5 inches for grade control, I made a jig, rack to hold a router for milling the excess foam expansion. I couldn't controll it. I belt sanded first then milled the foam with the router and jig. Next step plywood and glass.Fred Hoeffner 631-439-9963