Those set the air/fuel mixture. Turn both screws in together, until the motor starts to stumble. Do this very slowly, say a eighth of a turn at a time.. As soon as the motor starts to stumble, stop and back them out until it levels out.
Todd
________________________________
From: jd <jdood@...>
To: Evinrude & Johnson Boats of the 1960's and 70's <omc-boats@...>
Sent: Friday, June 19, 2009 2:55:30 PM
Subject: [OMC-Boats] carb question....
so no one knows and/or wants to take a crack at what the two adjusting screws under the carb actually do? would love to know......so i don't make things worse by guessing my way through. _______________________________________________
OMC-Boats mailing list
OMC-Boats@...
http://lists.ultimate.com/mailman/listinfo/omc-boats
Received on Friday, 19 June 2009
This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT