Dan,
Nothing is moving. The only thing I hear is the solenoid clicking. After re-reading what I wrote, I meant to say the drive isn't tilting. I'll try pulling out what appears to be the motor and cleaning it out.
Nexi
________________________________
From: dan <dbjt@...net>
To: Evinrude & Johnson Boats of the 1960's and 70's <omc-boats@....ultimate.com>
Sent: Tuesday, August 11, 2009 12:03:46 AM
Subject: Re: [OMC-Boats] Tilt not working on 1967 Sportsman 120
Nexi... on my 64 OMC there is a tilt motor on the right side of the engine facing rear...if you have the same setup...every spring i hear the dreaded sound of a solenoid clicking...
which means i have to pull the tilt motor out and clean it.... better straighten me out.... engine not tilting or leg not tilting? Dan..........
----- Original Message -----
>From: Nexi
>To: omc-boats@...
>Sent: Monday, August 10, 2009 6:05 PM
>Subject: [OMC-Boats] Tilt not working on 1967 Sportsman 120
>
>
>I went ahead and bought a battery, Marine - Starting, and started testing things out on the dash. Blower checks out ok but the tilt isn't working. I can hear a clicking in the rear when I flip the switch, but the engine isn't tilting. From researching a bit it seems the tilt is controlled by a solenoid. How do I track down the problem? Is it possible that the solenoid is bad even though it is clicking? Bad contacts perhaps?
>
>Right now I'm waiting for a second set of hands so I can figure out where the solenoid is located.
>
________________________________
_______________________________________________
>OMC-Boats mailing list
>OMC-Boats@...imate.com
>http://lists.ultimate.com/mailman/listinfo/omc-boats
>
Received on Tuesday, 11 August 2009
This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT