Re: [OMC-Boats] NEED LIST MANAGEMENT cont'd

in fact, i'm madly rushing here to try and get to my boat for it's
first test run in weeks after a ton of work. might not happen if i
can't get going now. yet i'm taking the time to scan through almost
all the OMC emails today to see if there might be anything that
pertains or new to know before I go out to my boat. worth it, even
if it means postponing my test run

On Aug 12, 2009, at 3:28 PM, Kim Foster wrote:

> We need to do something about better managing the listserve, IMO. I
> really find this a valuable resource for parts and general info on
> the boats. But it is getting ridiculous when I get 20-30 emails a
> day on somebody not knowing what oil to use or why their prop is
> spinning in neutral. Or a multi-chaptered play by play of your
> "shakedown cruise".... Who cares?
>
> Is there some way the list can be paired down so that you only get
> info pertaining to your particular boat? I only want to see OMC
> Deluxe 17 stuff. I don't want to wade through 30 emails about an
> Explorer or Evinrude... I'm not a computer geek so I don't know how
> you would do this, but I am just about to the point of cancelling my
> list serve...
>
> Maybe if 2-3 of you really want to discuss where your oil sender is,
> you could do carry on that discourse off the board?
>
> Don't want to sound cranky...just think it could be managed better...
>
> Date: Wed, 12 Aug 2009 14:05:51 -0700
> From: bldfw@...
> To: omc-boats@...
> Subject: Re: [OMC-Boats] More shakedown results
>
> Thanks Lee,
>
> I thought about that myself. I've worked with vinyl dye on some of
> my classic cars and it goes on smooth and tough though I'm not sure
> it's tough enough to withstand bumper rubs. Easily fixed though.
>
> -Bill
> Dallas, TX
> 1970 Evinrude Explorer - 155 Buick V6 - OMC Sterndrive
> http://www.photobucket.com/evinrude_explorer
>
>
>
> --- On Wed, 8/12/09, Lee Shuster <Lee.Shuster@...> wrote:
>
> From: Lee Shuster <Lee.Shuster@...>
> Subject: Re: [OMC-Boats] More shakedown results
> To: "'Evinrude & Johnson Boats of the 1960's and 70's'" <omc-boats@...
> >
> Date: Wednesday, August 12, 2009, 1:42 PM
>
> Bill,
>
> just wanted to say that I've admired your progress. You want to see
> something slightly North of 4000, not to exceed 4400 RPM with
> everything running perfectly.
>
> You can get excellent looking results using RED vinyl dye on that
> rub rail molding.
>
> Lee
>
> From: omc-boats-bounces@... [mailto:omc-boats-bounces@...
> ] On Behalf Of BLDFW
> Sent: Wednesday, August 12, 2009 8:56 AM
> To: omc-boats@...
> Subject: [OMC-Boats] More shakedown results
>
> Just completed my 3rd shakedown with almost excellent results. .She
> started right up and overall performed really well. After the gas
> tank cleanout it was nice to see clear gas in the glass filter
> rather than the murky brown pudding stuff. Oh, and my original
> sending unit worked just fine so I didn't need to spend money on a
> new one!
>
> I'll need to double check the timing as over the hour and half her
> performance denigrated a little bit. Also, when pulling back on the
> throttle she had a tendency to stall and towards the end we had to
> resort to priming the carb with a shot of gas. If I had to hazard
> a guess as to why that would develop, it could possibly be that the
> distributor shifted slightly causing retarded ignition. I had a
> problem getting to the hold down bolt and in hindsight worry that I
> might not have gotten it tight enough.
>
> I'm also pulling the alternator today and taking it down to the shop
> to have it check out and rebuilt if necessary. The volt gauge
> continued to reflect only about 11-11.5v and at the end of the run
> she didn't have enough juice to crank her over. We were going to
> jump her about 30mins later to get her over to the ramp but for
> grins I crank the key and found she recharged herself enough to get
> it started without jumpers. I know some of you guys said I could
> rebuild the alternator myself but the summer is ticking away.
>
> Question..... when doing a fast cruise but not WOT, whereabouts are
> your RPMs? My Explorer will plane out at about 3000 but feels
> happier at higher RPM. I got her as high as 3500 but could sense a
> very vague performance issue. It's likely a re-tune or better yet a
> Pertronix electronic ignition will fix that but didn't want to push
> it past that point just yet. What can I expect a comfortable WOT to
> be thereabouts?
>
> And finally....and I think i might know the answer to this already
> but nothing ventured, nothing gained.....is there a resource for new
> RED rub rail? I'd really like to replace the one there with red as
> opposed to black but will do black if I have to.
>
> Thanks.
>
> -Bill
> Dallas, TX
> 1970 Evinrude Explorer - 155 Buick V6 - OMC Sterndrive
> http://www.photobucket.com/evinrude_explorer
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> OMC-Boats mailing list
> OMC-Boats@...
> http://lists.ultimate.com/mailman/listinfo/omc-boats
>
>
> Get your vacation photos on your phone! Click here.
> _______________________________________________
> OMC-Boats mailing list
> OMC-Boats@...
> http://lists.ultimate.com/mailman/listinfo/omc-boats
Received on Thursday, 13 August 2009