In a message dated 8/23/04 3:51:20 PM Central Daylight Time,
mike.s.sweeney@... writes:
<< If the starter cranks the engine, would there be a fuse in the ignition
circuit? I am aware of the corrosion issue.. probably wouldn't hurt to clean all
contacts I can Find. >>
Oh - and don't forget the connector for the wiring harness in back of the
engine -
that connector is notorious for corrosion of the contacts as it often gets wet
and is never serviced. This is one BIG multipin round connector with male
and female connections.
Lee
Received on Tuesday, 24 August 2004
This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT