Tom on my 1970 Rogue after what you described happened I put on a Teleflex
Morse mechanical system. My 1966 Rogue already has the same installed.
According to my 1966 parts catalog the Teleflex Morse was an option in 1966.
----- Original Message -----
From: "Thomas Klauber" <tklauber@...>
To: <omc-boats-digest@...>
Sent: Thursday, July 14, 2005 8:02 PM
Subject: [omc-boats] Re: omc-boats-digest V1 #338
> As you say; my 69 Rogue has the round yellow plug for the tilt harness
> ( and also has a round black plug for the engine harness ) and I was
> wondering about the red plugs you see on ebay for the newer harnesses and
> there is also an adapter occasionally sold and I was wondering is there
> any way to use the newer harnesses on the older motors and tilt?. I notice
> the newer harnesses have different terminals also. Any thoughts on that.
> My harness BTW is doing well. Been out several times this year. My
> steering broke last time out and I fixed it this week. I reworked the
> pulley shackle at the back at the transom two years ago. The shackle
> mounts with hex head screws that screw into T-nuts anchored on the back
> side of the transom wood and the T-nuts deteriorated and I drilled out the
> T-nuts and glued in wood plugs fitted with new T-nuts. I used a wood
> filler type material to glue the plugs in and the filler failed and the
> plugs pulled out and the steering cables went limp so to speak. Luckily I
> was with friends and had no problem getting back. Now I glued the plugs in
> with epoxy and used a small mend plate to hold the plugs in. It should
> last. I underestimated the continuous pull on that shackle from the
> steering cable which is spring loaded. I noticed some deterioration in the
> steering cable where some of the plastic is worn off exposing the wire
> cable underneath so I plan on eventually replacing the entire cable.
> Anybody know where to get replacement black steering cable? I'll have to
> look up the length required - I have seen that figure somewhere. I'm also
> replacing the plastic rear cleats on the Rogue this week. I got chrome
> ones off ebay some time ago that were used on the older boats and they
> look exactly like the greenish plastic ones (which have split and cracked
> and otherwise perished from the elements ) except they are made of metal
> and are chrome plated and should last a lifetime. I am looking for 2 more
> to replace the front 2 cleats which are in a little better shape. Hope
> everyone is out enjoying the summer. I'm getting a good tan working out on
> my boat this week! Tom K.
> ----- Original Message -----
> From: "omc-boats-digest" <owner-omc-boats-digest@...>
> To: <omc-boats-digest@...>
> Sent: Wednesday, July 13, 2005 12:00 PM
> Subject: omc-boats-digest V1 #338
>
>
>>
>> omc-boats-digest Wednesday, July 13 2005 Volume 01 : Number
>> 338
>>
>>
>>
>> Re: [omc-boats] wiring harness
>>
>> ----------------------------------------------------------------------
>>
>> Date: Tue, 12 Jul 2005 19:54:33 -0600
>> From: <lib1@...>
>> Subject: Re: [omc-boats] wiring harness
>>
>> This is a multi-part message in MIME format.
>>
>> - ------=_NextPart_000_00DE_01C5871B.86750590
>> Content-Type: text/plain;
>> charset="iso-8859-1"
>> Content-Transfer-Encoding: quoted-printable
>>
>> If you look closely at the photo on this auction you'll see one of the =
>> large (yellow) round water-tight connectors. This would indicate a =
>> 1969-and-newer style harness.
>> The older harnesses used rectangular connectors.
>>
>> Lee Shuster
>> ----- Original Message -----=20
>> From: Glenn Halweg=20
>> To: omc-boats@...=20
>> Sent: Tuesday, July 12, 2005 9:04 AM
>> Subject: [omc-boats] wiring harness
>>
>>
>> Tilt wiring harness on eBay
>>
>> http://tinyurl.com/b2q7u
>>
>> - ------=_NextPart_000_00DE_01C5871B.86750590
>> Content-Type: text/html;
>> charset="iso-8859-1"
>> Content-Transfer-Encoding: quoted-printable
>>
>> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>> <HTML><HEAD>
>> <META http-equiv=3DContent-Type content=3D"text/html; =
>> charset=3Diso-8859-1">
>> <META content=3D"MSHTML 6.00.2900.2668" name=3DGENERATOR>
>> <STYLE></STYLE>
>> </HEAD>
>> <BODY bgColor=3D#ffffff>
>> <DIV><FONT face=3DArial size=3D2>If you look closely at the photo on =
>> this auction=20
>> you'll see one of the large (yellow) round water-tight connectors. =
>> This=20
>> would indicate a 1969-and-newer style harness.</FONT></DIV>
>> <DIV><FONT face=3DArial size=3D2>The older harnesses used rectangular=20
>> connectors.</FONT></DIV>
>> <DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>> <DIV><FONT face=3DArial size=3D2>Lee Shuster</FONT></DIV>
>> <BLOCKQUOTE dir=3Dltr=20
>> style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
>> BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
>> <DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
>> <DIV=20
>> style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
>> black"><B>From:</B>=20
>> <A title=3Dglennhalweg@... =
>> href=3D"mailto:glennhalweg@...">Glenn=20
>> Halweg</A> </DIV>
>> <DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
>> title=3Domc-boats@...=20
>> href=3D"mailto:omc-boats@...">omc-boats@...</A> =
>> </DIV>
>> <DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Tuesday, July 12, 2005 =
>> 9:04=20
>> AM</DIV>
>> <DIV style=3D"FONT: 10pt arial"><B>Subject:</B> [omc-boats] wiring =
>> harness</DIV>
>> <DIV><BR></DIV>
>> <DIV><FONT face=3DArial size=3D2>Tilt wiring harness on =
>> eBay</FONT></DIV>
>> <DIV><FONT face=3DArial size=3D2></FONT> </DIV>
>> <DIV><STRONG><A=20
>> =
>> href=3D"http://tinyurl.com/b2q7u">http://tinyurl.com/b2q7u</A></STRONG></=
>> DIV>
>> <DIV> </DIV></BLOCKQUOTE></BODY></HTML>
>>
>> - ------=_NextPart_000_00DE_01C5871B.86750590--
>>
>>
>> - -----
>> To get off this list send mail to omc-boats-unsubscribe@...
>>
>> ------------------------------
>>
>> End of omc-boats-digest V1 #338
>> *******************************
>>
>> -----
>> To get off this list send mail to
>> omc-boats-digest-unsubscribe@...
>
>
> -----
> To get off this list send mail to omc-boats-unsubscribe@...
-----
To get off this list send mail to omc-boats-unsubscribe@...
Received on Thursday, 14 July 2005
This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT