Re: [omc-boats] Ignition wires

Okay, so I tried to look up these models at the links Mark sent (http://www.buicks.net/buick-parts/index.html) and there was no 3.7L Buick Skylark listed for any of the model years.

I think the easiest route is to take the NOS set Anthony has on hand. (Anthony, I'll contact you separately to arrange since I still have your e-mail address.)

Thanks everyone!
  ----- Original Message -----
  From: lib1@...
  To: omc-boats@...
  Sent: Sunday, November 06, 2005 5:25 PM
  Subject: Re: [omc-boats] Ignition wires

  Just make sure you specify the 3.7L Buick Skylark 65-67 or Jeep 67-71 225 Cu In, not the Buick 231, which is a 3.8 or the 229 Chevy V6.

    ----- Original Message -----
    From: Andy Perakes
    To: omc-boats@...
    Sent: Sunday, November 06, 2005 2:52 PM
    Subject: Re: [omc-boats] Ignition wires

    Good to know -- thanks!
      ----- Original Message -----
      From: Jay Huggins
      To: omc-boats@...
      Sent: Sunday, November 06, 2005 4:32 PM
      Subject: Re: [omc-boats] Ignition wires

      I just put a new water pump on my 1969 Evinrude with the 233 engine. I got a water pump for a Jeep 233 and it fit great. It just had an extra port for the heater core and I just put a short piece of hose with a plug in it to block off the port. Ran all summer this year with no probs!!

-----
To get off this list send mail to omc-boats-unsubscribe@...
Received on Tuesday, 8 November 2005