Hi All,
For OMC electric stringer rebuilds or used OMC sterndrive parts:
I can also recommend (be sure and identify the year and model of your
sterndrive):
Hansen Marine & Motor
3347 W 3500 South, S SL, UT 84115
801.466.4731
Ask for Roy Hansen
Please mentioned my name:
lee.shuster@... <mailto:lee.shuster@...>
801.585.5552
________________________________
From: omc-boats-bounces@...
[mailto:omc-boats-bounces@...] On Behalf Of J.J. Ford
Sent: Thursday, April 10, 2008 10:14 AM
To: Evinrude & Johnson Boats of the 1960's and 70's
Subject: Re: [OMC-Boats] upper gear case
Thanks for the info...that's exactly what happened to mine and I expect
I'll be in the same neighborhood.
Thanks again,
JJ
----- Original Message -----
From: Don Fintak <mailto:D.Fintak@...>
To: J.J. Ford <mailto:jjford@...> ; Evinrude & Johnson
Boats of the 1960's and 70's <mailto:omc-boats@...>
Sent: Thursday, April 10, 2008 9:02 AM
Subject: Re: [OMC-Boats] upper gear case
JJ,
I think I spent a little over $2000.
That included parts and labor to rebuild the upper gear box (may
have even needed a new case, mine had run completely dry and chewed up
everything), ball gears and seals for the intermediate housing, lube,
and paint to pretty up the outdrive. After getting a quote on some of
the parts, I finally just sent him the gear box and he quoted what was
needed. I figured he knew a lot more than I did.
If you send an email to stone@... with what you
need, he gets back pretty quickly with what's available and prices. At
least he has in the past, I haven't had to contact him in the last three
years or so.
Good Luck,
Don
________________________________
From: omc-boats-bounces@...
[mailto:omc-boats-bounces@...] On Behalf Of J.J. Ford
Sent: Thursday, April 10, 2008 10:50 AM
To: Evinrude & Johnson Boats of the 1960's and 70's
Subject: Re: [OMC-Boats] upper gear case
Don-
Thanks for the advice...if you don't mind me asking...what
should I expect to pay for an operation like this?
Thanks
JJ
----- Original Message -----
From: Don Fintak <mailto:D.Fintak@...>
To: J.J. Ford <mailto:jjford@...> ; Evinrude &
Johnson Boats of the 1960's and 70's
<mailto:omc-boats@...>
Sent: Thursday, April 10, 2008 8:15 AM
Subject: Re: [OMC-Boats] upper gear case
I've had real good luck dealing with
www.outboard-parts.com
I have a '68 Playmate, so it's a little different, but
when I needed my upper gearbox rebuilt a couple years ago, he did great.
He will either sell the parts, or do the work. I sent him my gearbox and
he had it back in very short order. He also had new and used ball gears
in stock. I have also called with a couple questions and they were more
than willing to offer advice.
Come to think of I also was able to get carb parts for a
rebuild from them.
Hope this helps.
Don Fintak
________________________________
From: omc-boats-bounces@...
[mailto:omc-boats-bounces@...] On Behalf Of J.J. Ford
Sent: Wednesday, April 09, 2008 3:41 PM
To: omc-boats@...
Subject: [OMC-Boats] upper gear case
Anyone know of a reliable source for parts for the same
year that Ryan just inquired about? I've also got a 68 Sportsman
155...the upper gear case is shot. I'd either like it fixed, or I may
attempt to fix it myself with a spare week and some guidance.
Thanks
JJ Ford
________________________________
_______________________________________________
OMC-Boats mailing list
OMC-Boats@...
http://lists.ultimate.com/mailman/listinfo/omc-boats
________________________________
_______________________________________________
OMC-Boats mailing list
OMC-Boats@...
http://lists.ultimate.com/mailman/listinfo/omc-boats
Received on Thursday, 10 April 2008
This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT