Sorry I failed to mention the location of the trailer in my past post. It is at Allens Marine in FlorenceSC. We are near the coast and I-95. I am starting Evinrude Rogue #2 restoration. Should be easy as this is my second time. To the poster about gas tanks, I would restore the tank myself if it is not too rusted. The sender is Stewart Warner in my boat and you might check their web site. You can make your own gaskets using cork sheet and cut them out and use a leather punch to do the bolt holes. I use a thicker gasket for the sending unit as it has 3 tiny rivets that protrude from the bottom and you want a good seal between sender and tank. You do not want a fuel leak from the inspection plate or sender. TK
Received on Sunday, 22 March 2009
This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT