when you repainted the wheel it made the hole thicker with the paint, just
scrape off the paint on the inside of the wheel where the cap goes and it
should fit, and you could use epoxy to fix the center cap
On 4/16/09, BLDFW <bldfw@...> wrote:
>
> Hey guys,
>
> I repaired and repainted the original Evinrude steering wheel on my
> Explorer and scored a replacement center cap but find the center hub must
> have shrunk as the cap will not fit pasted the raised fins on inside
> perimeter of the cap. I'm not sure shaving them down will help either.
> Unfortunately, I cracked off a piece when trying.
>
> Anyone have any suggestions on alternatives of having just that big hole
> there?
>
> Thanks.
>
> -Bill
> Dallas, TX
> 1970 Evinrude Explorer - 155 V6 OMC
> http://www.photobucket.com/evinrude_explorer
>
> _______________________________________________
> OMC-Boats mailing list
> OMC-Boats@...
> http://lists.ultimate.com/mailman/listinfo/omc-boats
>
>
>
Received on Thursday, 16 April 2009
This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT