Andy, I was hoping someone here knew the trailer wheel bearing size. Sorry if the title of my post was confusing. Thanks for your reply and when I find the size I'll post it. My brother reports that he's tried 1 1/16" and 1 3/8" without success.
I've replaced bearings before and watching some generic video isn't going to tell me the size!
-Doug Julien
--- On Sun, 8/16/09, ANDY PERAKES <aperakes@...> wrote:
> From: ANDY PERAKES <aperakes@...>
> Subject: Re: [OMC-Boats] Help! Trailer wheel bearing size?
> To: "Evinrude & Johnson Boats of the 1960's and 70's" <omc-boats@...>
> Date: Sunday, August 16, 2009, 10:38 AM
> #yiv208245697 p
> {margin:0;}What kind of help do
> you need? Just saying "Help!" doesn't
> give us much to go on. I suggest you go to
> etrailer.com, trailerpartssuperstore.com, or
> trailerpartsdepot.com and watch some of the "how
> to" videos they have posted. That's going to
> do a lot more for you than a bunch of guessing at what kind
> of help you might need.
>
>
> ----- Original Message -----
> From: "Doug Julien" <dfjulien@...>
> To: "Evinrude & Johnson Boats of the 1960's
> and 70's" <omc-boats@...>
> Sent: Saturday, August 15, 2009 10:03:14 AM GMT -05:00
> US/Canada Eastern
> Subject: [OMC-Boats] Help! Trailer wheel bearing
> size?
>
> Hi all:
>
> My brother had a bearing failure on the factory trailer
> with the '69 Sportsman aboard. He's going back
> to the commuter lot today where he left it to replace the
> bearing. Is it a 1 1/16" size? Help!
>
> Fortunately this was *after* a great day yesterday with a
> cruise on Lake Michigan down to Saugatuck...so I don't
> feel too sorry for him.
>
> -Doug Julien
>
> --- On Fri, 8/14/09, Lee K. Shuster (lib1)
> <lib1@...> wrote:
>
> > From: Lee K. Shuster (lib1) <lib1@...>
> > Subject: Re: [OMC-Boats] Newer Upper gear cases
> > To: bchowk@..., "Evinrude & Johnson
> Boats of the 1960's and 70's"
> <omc-boats@...>
> > Date: Friday, August 14, 2009, 4:59 PM
> >
> >
> >
> >
> >
> >
> >
> > BC,
> >
> > Go online and look thru
> > the GLM catalog
> http://www.glmmarine.com/pdf/OMC_Catalog.pdf or
> >
> > call their office for advice. They have a fairly
> extensive
> > listing of upper gear
> > sets by year and hp rating. I'm pretty sure you
> can
> > interchange the upper gear
> > sets and housing to/from electric shifts: 69-71,
> 72-78, and
> > the later
> > cable-shifter 79-85 stringers, at least that's
> what I
> > conclude from a quick
> > glance at their catalog.
> >
> > I would imagine you would
> > be looking for the 21-19,
> > 21-18, and 21-17 "in-betweener" ratios.
> The
> > 21-16 is the tallest from the
> > Chevy and Ford 351, while your Buick's present
> ratio is
> > very close to 1:1,
> > either 25:25 or 21:20. If you go used -- then
> > you want to look
> > for upper gear sets from 165, 175, 190 hp stringers
> (ie
> > Chevy I-6, and 302 Fords
> > which are pretty common.)
> >
> > Lee
> >
> > ----- Original Message
> > -----
> > From:
> > BC Howk
> >
> > To: omc-boats@...
> >
> >
> > Sent: Friday, August
> > 14, 2009 1:58
> > PM
> > Subject: [OMC-Boats]
> > Newer Upper gear
> > cases
> >
> > Does anyone out there know what the difference is on
> > the upper
> > gearcase for a stringer post 1977.
> >
> > I've been toying with the idea of
> > changing the gearing on my sportsman and an
> upper gear
> > case caught my eye on
> > ebay relatively inexpensive (comparable to just
> gear
> > sets I have seen)
> > rebuilt with a nice 21-20 gear ratio but it
> says it is
> > for an 82-86 3.8 liter
> > V-6...OK, I have not dug really deep into my
> outdrive
> > research...yet, but I
> > haven't seen anything that explains the
> diference and
> > I am
> > just curious if I could use this newer upper
> > gearcase and bolt it right
> > in, I mean judging from every picture I have
> ever seen
> > the difference is not
> > immediately obvious...
> >
> > Anyone know?
> >
> > Cheers,
> > B.C.
> >
> >
> >
> >
> _______________________________________________
> > OMC-Boats mailing
> > list
> > OMC-Boats@...
> > http://lists.ultimate.com/mailman/listinfo/omc-boats
> >
> >
> > -----Inline Attachment Follows-----
> >
> > _______________________________________________
> > OMC-Boats mailing list
> > OMC-Boats@...
> > http://lists.ultimate.com/mailman/listinfo/omc-boats
> >
> _______________________________________________
> OMC-Boats mailing list
> OMC-Boats@...te.com
> http://lists.ultimate.com/mailman/listinfo/omc-boats
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> OMC-Boats mailing list
> OMC-Boats@...
> http://lists.ultimate.com/mailman/listinfo/omc-boats
>
Received on Sunday, 16 August 2009
This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT