Re: [OMC-Boats] Floor question...

That depends on whether there is holes in the glass or not or if any water
was trapped under the floor. You can take an Awl or punch and penetrate it
to see how soft it is in spots. The holes can be filled with 2 part epoxy or
some glass resin if the floor is not rotted.

On Thu, Aug 27, 2009 at 11:54 AM, Justin DeSantis <duc1098desmo@...>wrote:

> Nice. So the wood is glassed. Then is it safe to assume floor rot
> isn't a huge concern with these boats?
>
>
>
> On Wed, Aug 26, 2009 at 3:32 PM, BreAnne Upcott<h2onsnow@...> wrote:
> > You have fiberglass over treated plywood under the carpet.
> >
> > On Wed, Aug 26, 2009 at 2:44 PM, jd <jdood@...> wrote:
> >>
> >> water saturated foam
> >>
> >> On Aug 26, 2009, at 5:47 AM, Justin DeSantis wrote:
> >>
> >>> See, I told you guys I was going to have tons of questions....
> >>>
> >>> Does anyone know what material is under the carpet in my 67 Surfer?
> >>> The floor in the open bow is fiberglass, it's not covered, so I can
> >>> see it. But in the rear, what is under the carpet? Plywood? Glass? I
> >>> don't have any soft spots in the floor now, but I'd just like to know
> >>> if it's a wood floor so I know to be on the look out. And the carpet
> >>> is glues down tight. I don't want to loosen it to lift it if I don't
> >>> have to. Thanks!
> >>> _______________________________________________
> >>> OMC-Boats mailing list
> >>> OMC-Boats@...
> >>> http://lists.ultimate.com/mailman/listinfo/omc-boats
> >>
> >> _______________________________________________
> >> OMC-Boats mailing list
> >> OMC-Boats@...
> >> http://lists.ultimate.com/mailman/listinfo/omc-boats
> >
> >
> > _______________________________________________
> > OMC-Boats mailing list
> > OMC-Boats@...
> > http://lists.ultimate.com/mailman/listinfo/omc-boats
> >
> >
> _______________________________________________
> OMC-Boats mailing list
> OMC-Boats@...
> http://lists.ultimate.com/mailman/listinfo/omc-boats
>
Received on Thursday, 27 August 2009