Re: [OMC-Boats] Rogue cover

The other thing I've had good luck with are the standard cover supports.
You can buy kits that include slats of wood roughly 2" (51 cm for you EU
folks) wide, mounts to fix them to each side of the boat and an adjustable
spring-loaded cleat to adjust the width of the slats. I've been using them
for 20+ years and it literally takes me less than a minute to fix both slats
on the boat and tie them into position (so they don't tilt for or aft).
Here's a link to one buying option, but they're available pretty much
everywhere:
http://www.basspro.com/webapp/wcs/stores/servlet/ProductDisplay?hvarEID=2497
242&hvarAID=vantage&cm_ite=Boating+%3E+Water+Sports+%3E+Water+Toys+%26+Pool+
Accessories&catalogId=10001&URL=http%3A%2F%2Fwww.basspro.com%2Fwebapp%2Fwcs%
2Fstores%2Fservlet%2FProductDisplay%3FstoreId%3D10151%26catalogId%3D10001%26
langId%3D-1%26partNumber%3D16120%26cm_ven%3DAffiliate%26cm_cat%3DVantage%26c
m_pla%3Dfeed%26cm_ite%3DBoating+%3E+Water+Sports+%3E+Water+Toys+%26+Pool+Acc
essories&langId=-1&cm_pla=feed&cm_cat=Vantage&cm_ven=Affiliate&partNumber=16
120&storeId=10151. Good luck!
 

-----Original Message-----
From: omc-boats-bounces@...
[mailto:omc-boats-bounces@...] On Behalf Of Lee Shuster
(lib1)
Sent: Wednesday, February 24, 2010 6:57 PM
To: Evinrude & Johnson Boats of the 1960's and 70's
Subject: Re: [OMC-Boats] Rogue cover

Another alternative:

Just order up a semi-custom-fitted cover fitted for generic TRI-HULLS:

http://search.overtons.com/?D=tri-hull+cover&Nty=1&N=0&Dk=0&Ntt=tri-hull+cov
er

On Feb 24, 2010, at 3:56 PM, Thomas Klauber wrote:

> Your best bet is to get a large piece of waterproof canvas or pvc to cover
the entire topside. The cover will tend to collect water in the center part
and can dip down with enough weight to tear the cover. I built a support out
of 1" PVC to keep a convex upward bow of the cover so water runs off. The
support has 4 legs and cross members to give it stability and it has side
arms to support. I bought 8 foot long fiberglass lightweight corrugated
roofing panels that are approx. 3 ft wide to use as a support. It needs to
be easy to remove so you spend your time on the boat and not messing with
its cover. You can have stuff made if you got the money and I have done that
but the covers are good for maybe 5 years out in the elements. The Nielsen
(?sp) people are no longer in business and they made a mooring cover that
was quite nice but they are canvas and perish easily. They also originally
made the tops and side curtains and let that go. A shame but maybe they will
get it back !
 together again. I can send pictures of the cover and apparatus if you think
you might want to do that. You might get some canvas from a sail shop or a
trucking company. TK
> ----- Original Message ----- From: <omc-boats-request@...>
> To: <omc-boats@...>
> Sent: Wednesday, February 24, 2010 2:12 PM
> Subject: OMC-Boats Digest, Vol 34, Issue 11
>
>
>> Send OMC-Boats mailing list submissions to
>> omc-boats@...
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://lists.ultimate.com/mailman/listinfo/omc-boats
>> or, via email, send a message with subject or body 'help' to
>> omc-boats-request@...
>>
>> You can reach the person managing the list at
>> omc-boats-owner@...
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of OMC-Boats digest..."
>>
>>
>> Today's Topics:
>>
>> 1. Re: Cover for a 1969 Evinrude Rougue II (J?rgen Hansen)
>> 2. Re: Blue Rub Rail Insert (Chuck)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Wed, 24 Feb 2010 18:14:26 +0100
>> From: J?rgen Hansen <jph@...>
>> Subject: Re: [OMC-Boats] Cover for a 1969 Evinrude Rougue II
>> To: "Evinrude & Johnson Boats of the 1960's and 70's"
>> <omc-boats@...>
>> Message-ID: <84496DC2-2485-4FB5-95DB-6F71BC6D06AE@...>
>> Content-Type: text/plain; charset="iso-8859-1"
>>
>> Andy and Lee
>>
>> Thanks for your tips, which are quite sensible. Unfortunately, my boat is
located on a small island in the southern part of Denmark. I am about to
renovate it so it is currently on land.
>>
>> Getting a local canvas shop to take the ferry over to the island in order
to measure the both will cost at least a day's wages - I do not know if you
are aware of it, but we have some fantastic high wages in Denmark (and
equally high taxes).
>>
>> My only option is to obtain either the original drawings or buy an old
"throw away" cover that I can use as a model. Of course I will pay for
shipping and a reasonable amount of money for the cover.
>>
>> I have tried to send an email to Nielsen Canvas (
http://www.ncflags.com/) several times, but they seem to be closed and the
web site is now under redesign. Is there anyone who has additional
information about the company or the original drawings ?
>>
>> Joergen
>>
>>
>>
>> Den 22/02/2010 kl. 23.31 skrev Lee K. Shuster (lib1):
>>
>>> Andy,
>>>
>>> I thought of you when I came across this guy's Rochester 2-G Carb-to-TBI
conversion on a newer OMC Chevy V6:
>>> http://home.hiwaay.net/~davida1/boat.htm
>>>
>>> Note: How it runs just fine in Open Loop mode without O2 feedback using
the GM automotive ECM module. I admire how he expoxy coated the coolant
passages on the aluminum intake and did a very tidy installation with wiring
and plumbing. Shows how one can affordablly come up with a turn-key solution
using re-cycled parts and some imagination.
>>>
>>> Alas, I can dream of my ultimate (normally-aspirated ) induction system
for my small block V8 OMC (Ford or Chevy):
>>>
>>> Imagine how cool this "8-stack" would sound:
http://www.cpgnation.com/forum/inglese-introduces-weber-eight-stack-inductio
n-227.html
>>>
>>> lee
>>>
>>> ----- Original Message -----
>>> From: Andy Perakes
>>> To: Evinrude & Johnson Boats of the 1960's and 70's
>>> Sent: Monday, February 22, 2010 10:30 AM
>>> Subject: Re: [OMC-Boats] Cover for a 1969 Evinrude Rougue II
>>>
>>> That's some beautiful canvas work, Lee!!
>>>
>>> Btw, I went to the Detroit Boat Show last weekend. Another enticement
to stick with these old boats: catalytic converters rolled out on the 3.0 L
engines this year and hit the 4.3 L engines next year. They integrated the
cat. into the manifold and, per one dealer, the replacement cost increases
from $300 to $1400. Ouch! May as well be buying obsolete OMC parts! ;)
>>>
>>>
>>> ----- Original Message -----
>>> From: "Lee Shuster (lib1)" <lib1@...>
>>> To: "Evinrude & Johnson Boats of the 1960's and 70's"
<omc-boats@...>
>>> Sent: Monday, February 22, 2010 10:21:51 AM GMT -05:00 US/Canada Eastern
>>> Subject: Re: [OMC-Boats] Cover for a 1969 Evinrude Rougue II
>>>
>>> I would echo Andy's comments on custom covers, especially reinforcement.
>>>
>>> I also added a hinged velcro-secured "fuel filler" access flap so I can
refuel without having to untie or remove the storage cover.
>>>
>>> Covers are a wise investment. Since many boats are stored outdoors, a
cover can prevent underfloor water logging of the floatation foam.
>>>
>>> I had my covers made locally. Only the front tonneau was made to match
the original snap locations. A few snaps were added to secure the matching
blue mooring cover.
>>> The gray storage cover is secured to trailer using about a dozen small
diameter lines. (If you use this method, insure a unsecured line cannot drag
and be run over by a trailer tire.)
>>>
>>> The Blue Sunbrella mooring covers are never on when trailering. They add
a littler peace of mind when tying up over night at a public dock to keep
people from seeing into your boat.
>>>
>>> The Grey storage cover is typically on while trailering.
>>>
>>>
>>> Here are a few pictures of my locally made covers:
>>>
>>> http://hhscott.com/evinrude/mooring_cover.htm
>>>
>>> http://hhscott.com/evinrude/images/MVC1-001X.JPG
>>>
>>> http://hhscott.com/evinrude/images/DCP_0134.JPG
>>>
>>> http://hhscott.com/evinrude/images/BearLake_SkiGirls_Crop.jpg
>>>
>>>
http://hhscott.com/evinrude/images/lp/Lake%20Powell_Oct_2006/images/dcp_0889
.jpg
>>>
>>>
http://hhscott.com/evinrude/images/lp/Lake%20Powell_Oct_2006/images/dcp_0770
.jpg
>>>
>>>
http://hhscott.com/evinrude/images/lp/Lake%20Powell_Oct_2006/images/dcp_0815
.jpg
>>>
>>>
http://hhscott.com/evinrude/images/lp/Lake%20Powell_Oct_2006/lake_powell_sta
t.html
>>>
>>> Lee Shuster
>>> Salt Lake City
>>>
>>>
>>> On Feb 21, 2010, at 6:10 PM, Andy Perakes wrote:
>>>
>>> From Phil's website: http://www.ultimate.com/omc-boats/
>>>
>>> Nielsen Canvas Co, formerly Pfferrekorn Canvas, the Original Equip
supplier of OMC boats' mooring covers still has the patterns for all the OMC
boats, as well as Chris-Craft and Lyman. Contact Robert Nielsen for details
at: nielsencan(at)aol.com(419) 625-0521
>>> 805 W. Water St.; Sandusky, Ohio 44870 419-625-0581, 800-435-2471
>>>
>>> Another alternative is to contact a good local canvas shop and have them
make up something custom from old photos and brochures. Honestly the
original covers with the rub rail hooks weren't very good and I've had much
better luck with the custom top I had made that comes down over the rub
rail, then secures with snaps and a drawstring. I forget what windshield is
on the Rougue, but the sharp corners on my Reveler windshield are cover
killers; if you have anything like that be sure to keep reinforcing until
you think you've gone overboard, then add some more....and never trailer
with the cover on.
>>>
>>>
>>> ----- Original Message -----
>>> From: "J?rgen Hansen" <jph@...>
>>> To: omc-boats@...
>>> Sent: Sunday, February 21, 2010 12:28:04 PM GMT -05:00 US/Canada Eastern
>>> Subject: [OMC-Boats] Cover for a 1969 Evinrude Rougue II
>>>
>>> I'm missing a cover for a 1969 Evinrude Rougue II. I have tried to
contact a flag producer which should hold the original drawings, but they
seem to be closed. If someone holds a copy of the drawings or maybe an old
worn out cover that I can use as a model, I would very most like to buy it
whatever condition. Other ideas and suggestions on how I can obtain an cover
is very welcome.
>>>
>>> Regards
>>> Joergen
>>>
>>> _______________________________________________ OMC-Boats mailing list
OMC-Boats@...
http://lists.ultimate.com/mailman/listinfo/omc-boats
>>> _______________________________________________
>>> OMC-Boats mailing list
>>> OMC-Boats@...
>>> http://lists.ultimate.com/mailman/listinfo/omc-boats
>>>
>>>
>>> _______________________________________________ OMC-Boats mailing list
OMC-Boats@...://lists.ultimate.com/mailman/listinfo/omc-b
oats
>>> _______________________________________________
>>> OMC-Boats mailing list
>>> OMC-Boats@...
>>> http://lists.ultimate.com/mailman/listinfo/omc-boats
>>> _______________________________________________
>>> OMC-Boats mailing list
>>> OMC-Boats@...
>>> http://lists.ultimate.com/mailman/listinfo/omc-boats
>>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
<http://lists.ultimate.com/mailman/private/omc-boats/attachments/20100224/e5
81bfe4/attachment-0001.html>
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Wed, 24 Feb 2010 12:11:56 -0600 (CST)
>> From: Chuck <cbreen5510@...>
>> Subject: Re: [OMC-Boats] Blue Rub Rail Insert
>> To: omc-boats@...
>> Message-ID:
>> <600519241.396425.1267035116881.JavaMail.root@...>
>> Content-Type: text/plain; charset="us-ascii"
>>
>> An HTML attachment was scrubbed...
>> URL:
<http://lists.ultimate.com/mailman/private/omc-boats/attachments/20100224/e3
747ffb/attachment.html>
>> -------------- next part --------------
>> A non-text attachment was scrubbed...
>> Name: DSCF0114.jpg
>> Type: image/jpeg
>> Size: 310827 bytes
>> Desc: not available
>> URL:
<http://lists.ultimate.com/mailman/private/omc-boats/attachments/20100224/e3
747ffb/attachment.jpg>
>>
>> ------------------------------
>>
>> _______________________________________________
>> OMC-Boats mailing list
>> OMC-Boats@...
>> http://lists.ultimate.com/mailman/listinfo/omc-boats
>>
>>
>> End of OMC-Boats Digest, Vol 34, Issue 11
>> *****************************************
>
> _______________________________________________
> OMC-Boats mailing list
> OMC-Boats@...
> http://lists.ultimate.com/mailman/listinfo/omc-boats

_______________________________________________
OMC-Boats mailing list
OMC-Boats@...
http://lists.ultimate.com/mailman/listinfo/omc-boats
Received on Wednesday, 24 February 2010