My outfit was bought new in 1967. It is a 16' Evinrude I/O outfit.
I need to repair a small leak in the engine cooling manifold between the engine gas exhaust duct and the cooling water duct. I have used Marine Tex for small repairs in other applications and am aware of its good tensile and compression properties and am wondering whether it will stand up in the cooling manifold application. The hole areas might vary from narrow cracks up to one inch long up to voids in the wall 1/4 inch wide up to one inch long. The material could be applied up to about 1/4 inch thick.
Thanks for any suggestions or related experiences.
dewey clemmons
Received on Saturday, 17 March 2012
This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT