Re: [OMC-Boats] OMC-Boats Digest, Vol 75, Issue 5

Here's a post I made few years back
  (I had to fix the list archive search form at
   http://www.omc-boats.org/archive/ )

http://www.omc-boats.org/archive/2012/07/5444.html

    Hoggar wrote:
> I am currently trying to make a new lens for the back of my Surfer
> using this technique
> http://www.alumilite.com/howtos/TailLightMoldingNoEquipment.cfm

    Neat. I watched an episode of "American Restoration" on-line where
    they made a new lens for an old motor scooter, and I thought of the
    lenses on the OMC/Johnson 17 footers. Once someone has made a mold
    they should be able to cast any number of parts!

    Here's another place that sells rubber mold casting supplies, with videos
    (but unlike the link above, some of them require putting the mixture in
    a vacuum to remove bubbles from the rubber):

    http://www.smooth-on.com/

Two others:

http://www.omc-boats.org/archive/2012/07/5451.html
http://www.omc-boats.org/archive/2012/07/5452.html

_______________________________________________
OMC-Boats mailing list
OMC-Boats@...
http://lists.ultimate.com/mailman/listinfo/omc-boats
Received on Wednesday, 11 February 2015