RE: [omc-boats] Updated 1964 - 1966 Prop Part Numbers

You Minnesotans are a hardy lot!

Lee Shuster

Salt Lake City

http://hhscott.com

  _____

From: owner-omc-boats@... [mailto:owner-omc-boats@...]
On Behalf Of David
Sent: Wednesday, February 22, 2006 5:23 PM
To: omc-boats@...
Subject: Re: [omc-boats] Updated 1964 - 1966 Prop Part Numbers

Hey wait a minute, I'm here in Minnesota and just spent a wonderful day
on the Mississippi - broke a little ice, stopped for cook out, cruised
down to Lake Pepin - Ah yes, winter boating at it's best! Dave

Glenn Halweg wrote:

Hi Paul,

Everybody must be hibernating! Last week was around 0 degree's here in
Northern Illinois. Not much boating going on!

Glenn

----- Original Message -----

From: Paul <mailto:phamilton@...> Hamilton

To: omc-boats@...

Sent: Tuesday, February 21, 2006 9:06 PM

Subject: RE: [omc-boats] Updated 1964 - 1966 Prop Part Numbers

Hello,

Is there anybody out there? I haven't received any messages since
January. I guess I'll find out if there are issues with the list serve
if I don't hear from anyone. Paul

  _____

From: owner-omc-boats@... [mailto:owner-omc-boats@...]
On Behalf Of lib1@...
Sent: Monday, January 09, 2006 9:28 PM
To: omc-boats@...
Subject: [omc-boats] Updated 1964 - 1966 Prop Part Numbers

Hi,

I recently updated the following webpages to clarify which propeller
part numbers

must be used with 1964 to 1966 OMC stern drives of 120, 150 and 200 hp.

These models require the use of the aluminum "tapered hub"-style prop,
of 14.25-inch diameter, to clear the
exhaust outlet. The later style "straight-hub," 14.00-inch diameter will
not clear the 1964 - 1966 models.

Hope everyone's having a good start to the new year.

Lee Shuster

Salt Lake City

See:

http://hhscott.com/evinrude/choosing_a_prop.htm

and

http://hhscott.com/evinrude/prop_usage.htm

http://hhscott.com/evinrude/prop_chart_V8_210.htm

http://hhscott.com/evinrude/prop_chart_V6_155.htm

http://hhscott.com/evinrude/prop_chart_I4_120.htm

-----
To get off this list send mail to omc-boats-unsubscribe@...
Received on Wednesday, 22 February 2006