Re: [omc-boats] Updated 1964 - 1966 Prop Part Numbers

Actually Lee, it may seem like we are a hardy lot, but in truth it was
72 degrees inside my houseboat and I admit, we were putting ice cubes in
our drinks - the mississippi river from Red Wing Minnesota to the head
of Lake Pepin, about 13 miles, is kept open by the Treasure Island Nuke
plant - from the plant to Lake Pepin the plant heats two channels that
give me approximately 28 miles of river to boat on all year - Ah yes,
tis the life! Dave

Lee Shuster (L1hhs) wrote:

> You Minnesotans are a hardy lot!
>
>
>
> Lee Shuster
>
> Salt Lake City
>
> http://hhscott.com
>
> ------------------------------------------------------------------------
>
> From: owner-omc-boats@...
> [mailto:owner-omc-boats@...] On Behalf Of David
> Sent: Wednesday, February 22, 2006 5:23 PM
> To: omc-boats@...
> Subject: Re: [omc-boats] Updated 1964 - 1966 Prop Part Numbers
>
>
>
> Hey wait a minute, I'm here in Minnesota and just spent a wonderful
> day on the Mississippi - broke a little ice, stopped for cook out,
> cruised down to Lake Pepin - Ah yes, winter boating at it's best! Dave
>
> Glenn Halweg wrote:
>
> Hi Paul,
>
>
>
> Everybody must be hibernating! Last week was around 0 degree's here in
> Northern Illinois. Not much boating going on!
>
>
>
> Glenn
>
>
>
> ----- Original Message -----
>
> From: Paul Hamilton <mailto:phamilton@...>
>
> To: omc-boats@... <mailto:omc-boats@...>
>
> Sent: Tuesday, February 21, 2006 9:06 PM
>
> Subject: RE: [omc-boats] Updated 1964 - 1966 Prop Part Numbers
>
>
>
> Hello,
>
>
>
> Is there anybody out there? I haven't received any messages since
> January. I guess I'll find out if there are issues with the list
> serve if I don't hear from anyone. Paul
>
>
>
> ------------------------------------------------------------------------
>
> From: owner-omc-boats@...
> <mailto:owner-omc-boats@...>
> [mailto:owner-omc-boats@...] On Behalf Of
> lib1@... <mailto:lib1@...>
> Sent: Monday, January 09, 2006 9:28 PM
> To: omc-boats@... <mailto:omc-boats@...>
> Subject: [omc-boats] Updated 1964 - 1966 Prop Part Numbers
>
>
>
> Hi,
>
>
>
> I recently updated the following webpages to clarify which
> propeller part numbers
>
> must be used with 1964 to 1966 OMC stern drives of 120, 150 and
> 200 hp.
>
> These models require the use of the aluminum "tapered hub"-style
> prop, of 14.25-inch diameter, to clear the
> exhaust outlet. The later style "straight-hub," 14.00-inch
> diameter will not clear the 1964 - 1966 models.
>
>
>
> Hope everyone's having a good start to the new year.
>
>
>
> Lee Shuster
>
> Salt Lake City
>
>
> See:
>
> http://hhscott.com/evinrude/choosing_a_prop.htm
>
>
>
> and
>
>
>
> http://hhscott.com/evinrude/prop_usage.htm
>
> http://hhscott.com/evinrude/prop_chart_V8_210.htm
>
> http://hhscott.com/evinrude/prop_chart_V6_155.htm
>
> http://hhscott.com/evinrude/prop_chart_I4_120.htm
>
>
>
>
>

-----
To get off this list send mail to omc-boats-unsubscribe@...
Received on Thursday, 23 February 2006