RE: [omc-boats] 225 engine question

So the baffles should both be toward the stern as the one on starboard side?
So move the port side baffle aft also? Both parallel to one another?

   _____

From: owner-omc-boats@... [mailto:owner-omc-boats@...] On
Behalf Of lib1@...
Sent: Monday, March 19, 2007 9:54 AM
To: omc-boats@...
Subject: Re: [omc-boats] 225 engine question

The "Shields" are baffles for the valve cover vent breathers, which vent
crankcase fumes back to the fire arrester (carb) via hoses.

The PORT (nearest the distributor side) valve cover should be the one with
the OIL filler cap, which will locate aft nearest the stern.

Hope I've answered your questiom.

Lee Shuster

SalT LAKe

----- Original Message -----

From: HYPERLINK "mailto:kmoore21@..."Ryan Moore

To: HYPERLINK "mailto:omc-boats@..."omc-boats@...

Sent: Sunday, March 18, 2007 6:13 PM

Subject: [omc-boats] 225 engine question

Under the valve cover is these metal shields. I know the one on the left is
correct because I didn’t remove the bolt. I can’t seem to get the bolts on
the right head to line up so I tried it in the bottom two bolt holes. Is
this correct? Here is a pic.

HYPERLINK
"http://img406.imageshack.us/img406/4840/225buickas2.jpg"http://img406.image
shack.us/img406/4840/225buickas2.jpg

--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 268.18.13/725 - Release Date: 3/17/2007
12:33 PM
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 268.18.13/725 - Release Date: 3/17/2007
12:33 PM
-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 268.18.13/725 - Release Date: 3/17/2007
12:33 PM
 
-----
To get off this list send mail to omc-boats-unsubscribe@...