Hi Ryan,
Sorry if I confused you. Provided you install the valve covers with the vent holes oriented directly above the baffles, you'll be fine.
The oil fill cap can go the rear or the front whichever way you think is easier for filling.
Lee
----- Original Message -----
From: Ryan Moore
To: omc-boats@...
Sent: Monday, March 19, 2007 11:45 AM
Subject: RE: [omc-boats] 225 engine question
So the baffles should both be toward the stern as the one on starboard side? So move the port side baffle aft also? Both parallel to one another?
------------------------------------------------------------------------------
From: owner-omc-boats@... [mailto:owner-omc-boats@...] On Behalf Of lib1@...
Sent: Monday, March 19, 2007 9:54 AM
To: omc-boats@...
Subject: Re: [omc-boats] 225 engine question
The "Shields" are baffles for the valve cover vent breathers, which vent crankcase fumes back to the fire arrester (carb) via hoses.
The PORT (nearest the distributor side) valve cover should be the one with the OIL filler cap, which will locate aft nearest the stern.
Hope I've answered your questiom.
Lee Shuster
SalT LAKe
----- Original Message -----
From: Ryan Moore
To: omc-boats@...
Sent: Sunday, March 18, 2007 6:13 PM
Subject: [omc-boats] 225 engine question
Under the valve cover is these metal shields. I know the one on the left is correct because I didn’t remove the bolt. I can’t seem to get the bolts on the right head to line up so I tried it in the bottom two bolt holes. Is this correct? Here is a pic.
http://img406.imageshack.us/img406/4840/225buickas2.jpg
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 268.18.13/725 - Release Date: 3/17/2007 12:33 PM
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 268.18.13/725 - Release Date: 3/17/2007 12:33 PM
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 268.18.13/725 - Release Date: 3/17/2007 12:33 PM
-----
To get off this list send mail to omc-boats-unsubscribe@...
Received on Monday, 19 March 2007
This archive was generated by hypermail 2.2.0 : Tuesday, 29 July 2014 EDT